HV Diagnostics S.a.r.l Switzerland - Your High Voltage Specialists
 
Home
Technologies
Products
Applications
Brochures
Contact Us
Request a Quote
Distributors Required
Downloads
Staff Section
News
 
High Voltage Diagnostic Products

Oil Cable Leak Location System
High Voltage Diagnostics Sarl (HVDSA) have pioneered an innovative method of locating the position of faults in oil-filled cables that addresses the problems associated with the traditional method of exposing and freezing portions of the cable until the fault location is isolated.
More Information
Datasheet
BA75 - Portable Breakdown Analyzer for Oil Testing
Weight 22kg (48,5lbs). Test Voltage up to 75kV. Internal Battery External 12V Supply. Direct measurement of output voltage. Measurement of silicone oils.
More Information
Datasheet
BA100 - Portable Breakdown Analyzer for Oil Testing
Weight 32kg (70,5lbs). Test Voltage up to 100kV. Internal Battery External 12V Supply. Direct measurement of output voltage. Measurement of silicone oils.
More Information
Datasheet

HVA30 - VLF and DC Hipot Instrument
The single piece HVA30 is not only the most advanced high voltage VLF (Very Low Frequency) test system available; it is also the lightest, most compact instrument of its type on the market.
More Information
Datasheet
HVA30/5 - VLF and DC Hipot Instrument
The HVA30/5 has a very advantageous power / weight ratio. At 50kgs the HVA30/5 is one the lightest VLF test systems of its rating available today. Apart from the VLF output the HVA30/5 can also pro­duce either polarity DC together with a cable sheath /jacket testing modes.
More Information
Datasheet
HVA 60 - 4 in 1 Universal High Voltage Test System
The HVA60 is capable of testing 1µF (Approx. 10,000 ft/ 3000m of cable) at 0.1Hz and 60kV peak. The frequency of the output can also be reduced allowing even larger capacitance loads to be tested. At 0.02Hz, approx. 50,000 ft/15,000m of cable can be tested.
More Information
Datasheet
HVA 90 - 4 in 1 Universal High Voltage Test System
The HVA90 is capable of testing 1μF (Approx. 3300m / 11,000 ft of cable) at 0.1Hz and 64kV rms. The frequency of the output can also be reduced allowing even larger capacitance loads to be tested. At 0.01Hz, approx. 33,000m / 100,000ft of cable can be tested.
More Information
Datasheet
TD30 - Tan Delta Test System (33kV Peak)
Tan Delta testing enables the cable test engineer to detect insulation defects before the cablefails in service. The TD30 is a versatile tan delta measuring system that is directly connected the HVA series of VLF test systems.
More Information
Datasheet
TD60 - Tan Delta Test System (62kV Peak)
The TD60 measures up to a max voltage of 44kVrms (or 62kV peak). The TD60 is a battery powered system that is diectly connected to the HVA30 Series of VLF Test systems.
More Information
Datasheet
PD30/PD60 - PD Detection and location for MV Cables
A Partial Discharge is a partial electrical breakdown in the dielectric material which does not bridge the dielectric between the conductor and the concentric neutral. The unit of partial discharge measurement is the Pico Coulomb (pC).
More Information
Datasheet
 

BA75 - Portable Breakdown Analyzer for Oil Testing | BA100 - 100kV High Voltage Oil Tester | HVA30 - VLF and DC Hipot Instrument | HVA 90 - 4 in 1 Universal High Voltage Test System | TD30 - Tan Delta Test System (33kV Peak) | TD60 - Tan Delta Test System (62kV Peak) | PD30/PD60 - PD Detection and location for MV Cables